Does somebody have software 4.40 or a download link? Unfortunately the Keysight FTP server seems to be empty. And it seems there are only two software downloads available from Agilent: SetupLA03671008.exe (which is older than what's on my machine) and SetupLA05901110.exe (which might be incompatible as mentioned in Receiving "NO VALID ID DETECTED IN FRAME!" while trying to install Agilent LPA on a 16903A?). I was able to download a ISO ghost image for the M-815G mainboard (16900-14121, it's for the 16900 but it should boot) but it seems this image is only the base image without the LA application (at least GhostExp doesn't show Agilent software or setup programs). I assume the upgrade wasn't available for the 16903 as Agilent didn't use standard ATX backcovers and the connectors of the M-890 wouldn't fit through the 16903 mainboard tray without drill, jigsaw and file - a service Agilent probably didn't want to offer. But I don't know the exact software version that was used for the upgrade. The platform should support Win7 and Multi-Core CPUs as there has been an official update for the 16900 and the 16902 to an ADLINK M-890 board with an C2D E8400 and Win7. However I might want to re-install it or even upgrade to a newer mainboard if that would be possible. Probably one of the slowest VGA's ever built, even the Windows menus com appear with significant lag. However the 65550 VGA card in the 16903's backplane might be part of the problem. I used 2k and XP for ages, even with PIIIs but I don't remember it being so slow and unresponsive. Theoretically this should be a powerful machine but after messing around for some days with the old single core P3/1GHz I'm not so sure any more. The installed software version on the machine is. I got a used 16903A Logic Analyzer with an ADLINK M-815G mainboard and a (very slow) PIII 1000MHz with Windows XP.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |